License Lamps Inoperative One
Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Did you perform the Exterior Lights System Check? | -- | Go to Step 2 | |
2 |
Does the test lamp light? | -- | Go to Step 3 | Go to Step 4 |
3 |
Does the test lamp light? | -- | Go to Step 5 | Go to Step 6 |
4 | Repair the open in CKT 150 (BLK) between the license lamp connector and ground G401. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | -- | |
5 | Replace the license lamp bulb. Refer to Rear License Lamp Replacement . Is the repair complete? | -- | -- | |
6 | Repair the open in CKT 9 (BRN) between splice S415 and the license lamp connector. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | -- |
License Lamps Inoperative Both
Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Did you perform the Exterior Lights System Check? | -- | Go to Step 2 | |
2 | Connect a test lamp between the headlamp and panel dimmer switch, cavity H for CKT 240 (BRN), and ground. Does the test lamp light? | -- | Go to Step 3 | Go to Step 4 |
3 |
Does the test lamp light? | -- | Go to Step 5 | Go to Step 6 |
4 | Repair the open in CKT 240 (BRN) between the instrument panel fuse block and the headlamp and panel dimmer switch. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | -- | |
5 | Repair the open in CKT 9 (BRN) between the headlamp and panel dimmer switch and splice S210. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | -- | |
6 | Replace the headlamp and panel dimmer switch. Refer to Multifunction, Turn Signal, and Hazard Switch Replacement - On Vehicle . Is the repair complete? | -- | -- |
