Assist Handle Replacement 3rd Door Pickup

1. Remove the handle screw covers using a small flat-bladed prying device.
2. Remove the screws.
3. Remove the handle.

1. Install the handle.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

2. Install the handle screws.

Tighten
Tighten the handle screws to 6 N·m (53 lb in).

3. Install the handle screw covers by pushing the covers into place.

Assist Handle Replacement Utility

1. Remove the handle screw covers using a small flat-bladed prying device.
2. Remove the screws.
3. Remove the handle.

1. Install the handle.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

2. Install the handle screws.

Tighten
Tighten the handle screws to 6 N·m (53 lb in).

3. Install the handle screw covers by pushing the covers into place.

Assist Handle Replacement Extended Cab

1. Remove the handle screw covers using a small flat-bladed prying device.
2. Remove the screws.
3. Remove the handle.

1. Install the handle.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

2. Install the handle screws.

Tighten
Tighten the handle screws to 6 N·m (53 lb in).

3. Install the handle screw covers by pushing the covers into place.

Assist Handle Replacement Pickup

1. Remove the handle screw covers using a small flat-bladed prying device.
2. Remove the screws.
3. Remove the handle.

1. Install the handle.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

2. Install the handle screws.

Tighten
Tighten the handle screws to 6 N·m (53 lb in).

3. Install the handle screw covers by pushing the covers into place.