For 1990-2009 cars only
- The rear defogger bus bar lead wire or terminal can be reattached by soldering. Use a solder containing 3 percent silver and a rosin flux paste.
- Before soldering the bus bar, the repair area should be buffed with fine steel wool.
- Apply the paste-type rosin flux in small quantities to the wire lead and bus bar repair area using a brush.
This removes the oxide coating formed during the glass manufacture.
Important: Do not overheat the wire when resoldering the wire to the bus bar.
The soldering iron tip should be coated with solder beforehand. Use only enough solder to ensure a complete repair.
