Removal Procedure
- Remove the trim panel. Refer to
Rear Side Door Trim Panel Replacement
.
- Remove the water deflector. Refer to
Rear Side Door Water Deflector Replacement
.
- Disconnect the inside
door handle and lock control rods.
- Removing the outside door
handle by completing the appropriate step:
• | On the Crew Cab vehicles, unsnap the threaded clip in order to
remove the outside door handle. |
• | On the 4-door Yukon/Tahoe vehicles, push in the clip in order
to remove the outside door handle. |
- Disconnect the power door lock connector.
- Remove the lock assembly bolts.
- Remove the lock assembly from the vehicle.
- On utility vehicles, remove the child security lock from the lock
assembly.
Installation Procedure
- Install the lock assembly
to the vehicle.
- On utility vehicles, install the child security lock to the lock
assembly.
- Install the lock assembly bolts.
- Connect the power lock connector.
- Install the outside door
handle by completing the appropriate step:
• | On the Crew Cab vehicles, snap the threaded clip in
order to install the outside door handle. |
• | On the 4-door Yukon/Tahoe vehicles, push in the clip in order
to install the outside door handle. |
- Install the water deflector. Refer to
Rear Side Door Water Deflector Replacement
.
- Install the trim panel. Refer to
Rear Side Door Trim Panel Replacement
.