Tools Required

J 34940 Rivet Gun

The power window motor cannot be serviced. Replace the power window motor as a unit with the regulator.

1. Remove the trim panel. Refer to Front Side Door Trim Panel Replacement .
2. Remove the water deflector. Refer to Front Side Door Water Deflector Replacement .
3. Remove the inner mounting panel assembly. Refer to Front Door Module Replacement .



4. Drill out the front and rear rivets securing the regulator to the door inner panel.
5. Remove the regulator from the inner panel.

1. Install the regulator to the inner panel.
2. Using the J 34940 , install the rivets securing the regulator to the door inner panel.
3. Install the inner mounting panel assembly. Refer to Front Door Module Replacement .
4. Install the water deflector. Refer to Front Side Door Water Deflector Replacement .
5. Install the trim panel. Refer to Front Side Door Trim Panel Replacement .