Jack and Tool Stowage Replacement Pickup and Crew Cab

1. Remove the nut retaining the jack and tool stowage container cover.



2. Remove the jack and tools from the stowage container.



3. Remove the tool stowage container from the bracket.

1. Install the tool stowage container to the bracket.



2. Install the jack and tools into the stowage container.




Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

3. Install the jack and tool stowage tray cover and nut.

Tighten
Tighten the nut to retain the jack and tool stowage tray cover to 5 N·m (44 lb in).

Jack and Tool Stowage Replacement Extended Cab Pickup

1. Remove the nut retaining the jack and tool stowage container cover.



2. Remove the jack and tools from the stowage container.



3. Remove the tool stowage container from the bracket.

1. Install the tool stowage container to the bracket.



2. Install the jack and tools into the stowage container.




Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

3. Install the jack and tool stowage tray cover and nut.

Tighten
Tighten the nut to retain the jack and tool stowage tray cover to 5 N·m (44 lb in).

Jack and Tool Stowage Replacement Utility

1. Remove the nut retaining the jack and tool stowage tray cover.
2. Remove the tool stowage tray cover



3. Remove the jack and tools from the stowage tray.
4. Remove the jack and tool stowage tray.

1. Install the jack and tool stowage tray.
2. Install the jack and tools into the stowage tray.




Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

3. Install the jack and tool stowage tray cover and nut.

Tighten
Tighten the nut to retain the jack and tool stowage tray cover to 5 N·m (44 lb in).