Endgate Assist Handle Replacement Avalanche

1. Open the cargo box stowage lid.



2. Remove the retaining bolts (1) from the assist handle.
3. Remove the assist handle from the endgate.

1. Install the assist handle to the endgate cap.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

2. Install the bolts (1) to the assist handle in order to attach the assist handle to the endgate cap.

Tighten
Tighten the bolts to 9 N·m (80 lb in).

3. Close the cargo box stowage lid.