GM Service Manual Online
For 1990-2009 cars only
Makes
🢒
GMC_Truck
🢒
2003
🢒
Yukon Denali
🢒
Steering
🢒
Power Steering System
🢒 Power Steering Pump Pulley Replacement
Tools Required
•
J 25034-C
Power Steering Pump Pulley Remover
•
J 25033-C
Power Steering Pump Pulley Installer
Removal Procedure
Remove the upper fan shroud. Refer to
Engine Coolant Fan Upper Shroud Replacement
in Engine Cooling.
Remove the drive belt. Refer to
Drive Belt Replacement - Accessory
or
Drive Belt Replacement - Accessory
in Engine Mechanical.
Remove the power steering pump pulley using the
J 25034-C
.
Installation Procedure
Place the power steering pump pulley on the end of the power steering pump shaft.
Install the power steering pump pulley using
J 25033-C
.
Ensure that the power steering pump pulley (1) is flush against the power steering pump shaft, with an allowable variance of 0.25 mm (0.010 in).
Install the drive belt. Refer to
Drive Belt Replacement - Accessory
or
Drive Belt Replacement - Accessory
in Engine Mechanical.
Install the upper fan shroud. Refer to
Engine Coolant Fan Upper Shroud Replacement
in Engine Cooling.