Removal Procedure
- Fold down the rear seat.
- Remove the rear removable glass panel.
- Remove the midgate. Refer to
Removable Mid Gate Replacement
.
- Remove the floor hinge molding.
- Starting from one end remove the weatherstrip from the vehicle.
Installation Procedure
Important: To begin the installation of the weatherstrip, ensure the weatherstrip
is at a minimum of 21°C (70°F).
- Starting from one end of the weatherstrip, install the weatherstrip.
- Ensure the corners of the weatherstrip are fully seated.
- Install the floor hinge molding.
- Install the midgate. Refer to
Removable Mid Gate Replacement
.
- Close the midgate.
- Install the rear removable rear glass panel.
- Inspect the weatherstrip when the midgate is closed and the glass
panel installed.
- Set the rear seat in the upright position.