GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 2005 🢒 Yukon Denali 🢒 Body 🢒 Roof 🢒 Sunroof Module Assembly Replacement

Removal Procedure
  1. Remove the sunroof window. Refer to Sunroof Window Replacement .
  2. Remove the sunroof finishing lace. Refer to Sunroof Opening Trim Finish Lace Replacement .
  3. Remove the headliner. Refer to Headlining Trim Panel Replacement in Interior Trim.
  4. Remove the sunshade. Refer to Sunroof Sunshade Replacement .

    5. Object Number: 582982 Size: SH
  5. Remove the drain hoses. Refer to Sunroof Housing Front Drain Hose Replacement and Sunroof Housing Rear Drain Hose Replacement .
  6. Disconnect the electrical connectors.
  7. Remove the 9 bolts retaining sunroof module.
  8. Remove the module from vehicle.

Installation Procedure

    Object Number: 582982 Size: SH
  1. Install the module to the vehicle.

    2. Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 730181 Size: SH
  2. Loosely install the 9 bolts retaining the module to the roof.

    3. Use a drill bit to align the 2 holes A and B.

    Tighten
    Tighten the 9 bolts in the sequence shown to 9 N·m (80 lb in).

  3. Connect the electrical connectors.
  4. Install the drain hoses. Refer to Sunroof Housing Front Drain Hose Replacement and Sunroof Housing Rear Drain Hose Replacement .
  5. Install the sunshade. Refer to Sunroof Sunshade Replacement .
  6. Install the headliner. Refer to Headlining Trim Panel Replacement in Interior Trim.
  7. Install the finishing lace. Refer to Sunroof Opening Trim Finish Lace Replacement .
  8. Install the sunroof window. Refer to Sunroof Window Replacement .
  9. Synchronize the sunroof motor if necessary. Refer to Sunroof Motor/Actuator Synchronization .