Tools Required

1. Remove the wiper arms. Refer to Windshield Wiper Arm Replacement .
2. Remove the air inlet grille panel. Refer to Air Inlet Grille Panel Replacement in Body Front End.
3. Remove the 4 bolts and the reinforcement panel.



4. Disconnect the electrical connector from the wiper motor.



5. Remove the 2 bolts from the wiper transmission assembly.
6. Remove the wiper transmission assembly from the vehicle.



7. Remove the drive link from the wiper motor crank arm with the J 39232 .



8. Remove the 2 bolts retaining the wiper motor.
9. Remove the wiper motor from the wiper transmission assembly.

Notice: Refer to Fastener Notice in the Preface section.

1. Install the wiper motor onto the wiper transmission assembly with the 2 bolts.

Tighten
Tighten the 2 bolts to 8 N·m (71 lb in).




2. Install the drive link onto the wiper motor crank arm with the J 39529 .



3. Install the wiper transmission assembly on the vehicle with the 2 bolts.

Tighten
Tighten the 2 bolts to 9 N·m (80 lb in).




4. Connect the electrical connector to the wiper motor .



5. Install the reinforcement panel with the 4 bolts.

Tighten
Tighten the 4 bolts to 9 N·m (80 lb in).

6. Install the air inlet grille panel. Refer to Air Inlet Grille Panel Replacement in Body Front End.
7. Install the wiper arms. Refer to Windshield Wiper Arm Replacement .
8. Operate the wipers and inspect for proper operation.