Notice: In order to avoid actuator damage, DO NOT apply power to the actuator when it is not installed in the HVAC module.

1. Remove the I/P insulator panel. Refer to Instrument Panel Insulator Replacement.



2. Disconnect the electrical connector (1) from the left air temperature actuator (2).
3. Remove the screws from the left air temperature actuator (2).
4. Remove the left air temperature actuator (2) from the HVAC module assembly (3).

1. Install the left air temperature actuator (2) to the HVAC module assembly (3).

Notice: Refer to Fastener Notice in the Preface section.

2. Install the screws to the left air temperature actuator (2).

Tighten
Tighten the screws to 2 N·m (18 lb in).

3. Install the electrical connector (1) to the left air temperature actuator (2).
4. Install the I/P insulator panel. Refer to Instrument Panel Insulator Replacement.
5. Reprogram the left air temperature actuator. Refer to Actuator Recalibration.