ABS: Refer to ABS Description and Operation

Air Bag: Refer to SIR System Description and Operation

(Canada)

BRAKE (U.S.)

Brake: Refer to Brake Warning System Description and Operation

Charge: Refer to Charging System Description and Operation

(Canada)

CRUISE (U.S.)

CRUISE: Refer to Cruise Control Description and Operation

Fasten Safety Belt: Refer to Seat Belt System Description and Operation

SERVICE 4WD: Refer to

High Beam: Refer to Exterior Lighting Systems Description and Operation

Low Fuel

Low Fuel: Refer to Indicator/Warning Message Description and Operation

PARK BRAKE

Park Brake: Refer to Park Brake System Description and Operation

(Canada)

SECURITY (U.S.)

SECURITY: Refer to Theft Systems Description and Operation

(Canada)

SERVICE ENGINE SOON (U.S.)

Malfunction Indicator Lamp (MIL): Refer to

Tire Pressure Monitor: Refer to Tire Pressure Monitor Description and Operation

Traction Off: Refer to ABS Description and Operation

TOW/HAUL: Refer to Transmission Indicators and Messages for the Automatic Transmission - 4L60-E

Turn Signals: Refer to Exterior Lighting Systems Description and Operation

The instrument panel cluster (IPC) illuminates the shift indicator when the powertrain control module (PCM) determines that the vehicle should be shifted to the next higher gear. The IPC receives a class 2 message from the PCM requesting illumination.

BATTERY NOT CHARGING

Refer to Charging System Description and Operation

CARGO DOOR AJAR

Refer to Cargo Door Description and Operation in Body Rear End

CHANGE ENGINE OIL

The instrument panel cluster (IPC) illuminates the CHANGE ENGINE OIL message when the powertrain control module (PCM) determines that the engine oil should be changed. The IPC receives a class 2 message from the PCM requesting illumination. Once the oil is changed, perform the engine oil monitor reset procedure in order to clear the Change Engine Oil indicator. Refer to GM Oil Life System Resetting .

CHECK OIL LEVEL

The instrument panel cluster (IPC) illuminates the CHECK OIL LEVEL message in the driver information center (DIC) when the powertrain control module (PCM) detects a low engine oil level condition. The PCM only monitors the oil level switch signal circuit for a brief period between key on and ignition crank. The IPC receives a class 2 message from the PCM requesting illumination.

CHECK TIRE PRESSURE

Refer to Tire Pressure Monitor Description and Operation

CHECK WASHER FLUID

Refer to Wiper/Washer System Description and Operation

DRIVER DOOR AJAR

Refer to Door Ajar Indicator Description and Operation

ENGINE COOLANT HOT

Refer to Cooling System Description and Operation

ENGINE OVERHEATED

Refer to Cooling System Description and Operation

FUEL LEVEL LOW

The instrument panel cluster (IPC) illuminates the FUEL LEVEL LOW message in the driver information center (DIC) and the LOW FUEL indicator when the IPC detects that the fuel level is less than a pre-determined value. The IPC receives a class 2 message from the powertrain control module (PCM) indicating fuel level percent.

ICE POSSIBLE

The instrument panel cluster (IPC) illuminates the ICE POSSIBLE message in the driver information center (DIC) when the outside air temperature drops below 2.5°C (36.5°F). The IPC receives a class 2 message from the HVAC control module indicating the outside air temperature.

LEFT REAR DOOR AJAR

Refer to Door Ajar Indicator Description and Operation

LOW COOLANT LEVEL

Refer to Cooling System Description and Operation

OIL LIFE RESET

The instrument panel cluster (IPC) illuminates the OIL LIFE RESET message when the powertrain control module (PCM) determines that the engine oil should be changed. The IPC receives a class 2 message from the PCM indicating the remaining oil life percent. Once the oil is changed, perform the engine oil monitor reset procedure in order to clear the Change Engine Oil indicator. Refer to GM Oil Life System Resetting .

OIL PRESSURE LOW

The instrument panel cluster (IPC) illuminates the OIL PRESSURE LOW message in the driver information center (DIC) when the powertrain control module (PCM) detects a low oil pressure condition with the signal circuit low. The IPC receives a class 2 message from the PCM requesting illumination.

OVERSPEED

The instrument panel cluster (IPC) illuminates the OVERSPEED indicator when the IPC detects that the vehicle speed is more than 120 km/h (75 mph).

PASSENGER DOOR AJAR

Refer to Door Ajar Indicator Description and Operation

PROGRAM CLUSTER

The instrument panel cluster (IPC) illuminates the PROGRAM CLUSTER message in the driver information center (DIC) when the IPC has not been programmed after an IPC replacement. Refer to Service Programming System (SPS) .

REAR ACCESS OPEN

Refer to Cargo Door Description and Operation

REDUCED ENGINE POWER

Refer to

REPLACE LIFTGATE FUSE

Refer to Power Door Locks Description and Operation

RFA X BATTERY LOW

Refer to Keyless Entry System Description and Operation

RIGHT REAR DOOR AJAR

Refer to Door Ajar Indicator Description and Operation

SEATBELT REMINDER

Refer to Seat Belt System Description and Operation

SERVICE 4 WHEEL STEER

Refer to Rear Wheel Steering Description and Operation

SERVICE 4WD

Refer to

SERVICE AIR BAG

Refer to SIR System Description and Operation

SERVICE BRAKE BOOSTER

Refer to Brake Warning System Description and Operation

SERVICE BRAKE SYSTEM

Refer to Brake Warning System Description and Operation

SERVICE RIDE CONTROL

Refer to Electronic Suspension Control Description and Operation

SERVICE TIRE MONITOR

Refer to Tire Pressure Monitor Description and Operation

SERVICE STABILITY

Refer to ABS Description and Operation

STABILITY SYSTEM ACTIVE

Refer to ABS Description and Operation

STABILITY SYSTEM DISABLED

Refer to ABS Description and Operation

STABILITY SYSTEM READY

Refer to ABS Description and Operation

TIGHTEN FUEL CAP

The instrument panel cluster (IPC) illuminates the TIGHTEN FUEL CAP message in the driver information center (DIC) when the powertrain control module (PCM) detects a low fuel pressure condition. The IPC receives a class 2 message from the PCM requesting illumination.

TRACTION ACTIVE

Refer to ABS Description and Operation

TRACTION SYSTEM LIMITED

Refer to ABS Description and Operation

TRANS IN WARM UP

Refer to Transmission Indicators and Messages for the Automatic Transmission - 4L60-E

TURN SIGNAL ON

Refer to Exterior Lighting Systems Description and Operation

VEHICLE SPEED LIMITED

The instrument panel cluster (IPC) illuminates the VEHICLE SPEED LIMITED message in the driver information center (DIC).