Subject: | Intermittent Heated Seats Inoperative, DTC B3941 Set (Reprogram Driver Seat Module) |
Models: | 2003-2005 Cadillac Escalade, Escalade ESV, Escalade EXT |
2003-2005 Chevrolet Avalanche, Silverado, Suburban, Tahoe |
2003-2005 GMC Sierra, Yukon, Yukon XL, Yukon Denali |
All with Seat FRT, Individual (Non BKT) (RPO AN3) |
2003-2005 HUMMER H2 with Seat, Front Bucket Deluxe (RPO AR9) |
Some customers may comment that occasionally the seat heater will not operate when activated. If the ignition key is cycled OFF and back ON again, the heated seat will operate correctly. Also, on some LB7 diesel engine vehicles, the seat heater may turn itself off during the first 10 minutes of operation. This occurs only with the first activation for the day and works correctly with subsequent activations immediately after the event. These conditions are intermittent and DTC B3941 may be set.
Technicians are to reprogram the driver seat module with an updated software calibration. This new service calibration was released with TIS satellite data update version 6.5 available June 13, 2005. As always, make sure your Tech 2® is updated with the latest software version.
Labor Operation | Description | Labor Time |
---|---|---|
N9524* | Driver Seat Module - Reprogram | 0.4 hr |
*This is a unique labor operation number for use only with this bulletin. This number will not be published in the Labor Time Guide.