Tools Required

1. Install the J 23327 with a J 35683 and compress the 1st-reverse brake piston return spring until the 1st-reverse brake piston return spring snap ring (2) can be removed.



2. Remove the 1st-reverse brake piston return spring snap ring (1) from the transaxle case.
3. Remove the J 23327 and the J 35683 from the transaxle case.



4. Remove the 1st-reverse brake piston return spring (1) from the transaxle case.

Caution: Wear safety glasses in order to avoid eye damage.

Important: When using compressed air to remove components, air pressure should not exceed 98 kPa (14 psi).




5. Remove the 1st-reverse brake piston (1) from the transaxle case by slowly applying low pressure compressed air into the fluid passage (2).
6. Remove the 1st-reverse brake assembly. Refer to First Reverse Brake Assembly Replacement .