Preliminary Procedure

Open the liftgate in order to access the tail lamp assembly screws.

1

Tail Lamp Assembly Screws (Qty: 2)

Notice: Refer to Fastener Notice in the Preface section.

Tighten
2 N·m (18 lb in)

2

Tail Lamp Assembly Locator Pins (Qty: 2)

Tip
Upon tail lamp removal, some effort is needed to disengage the locating pins from the rear body panel retainer nuts.

3

Tail Lamp Retainer Nuts (Qty: 2)

4

Tail Lamp Wiring Harness Assembly Connector

5

Tail Lamp Assembly

Tip
Upon installation, push inward on the tail lamp in order to seat the 2 locating pins.

Preliminary Procedure

Open the liftgate in order to access the tail lamp assembly screws.

1

Tail Lamp Assembly Screws (Qty: 2)

Notice: Refer to Fastener Notice in the Preface section.

Tighten
2 N·m (18 lb in)

2

Tail Lamp Assembly Locator Pins (Qty: 2)

Tip
Upon tail lamp removal, some effort is needed to disengage the locating pins from the rear body panel retainer nuts.

3

Tail Lamp Retainers (Qty: 2)

4

Tail Lamp Wiring Harness Assembly Connector

5

Tail Lamp Assembly

Tip
Upon installation of the tail lamp, push inward on the lamp in order to seat the 2 locator pins into the retainer nuts.

Preliminary Procedure

Open the endgate in order to access the tail lamp assembly screws.

1

Tail Lamp Assembly Screw (Qty: 2)

Notice: Refer to Fastener Notice in the Preface section.

Tighten
2 N·m (18 lb in)

2

Tail Lamp Wiring Harness Assembly Connector

3

Tail Lamp Assembly

Tip
Upon installation, push inward on the tail lamp in order to seat the 2 locating pins in the body panel.