Callout | Component Name |
---|---|
Caution: When a hood hold open device is being removed or installed, provide alternate support to avoid the possibility of damage to the vehicle or personal injury. Preliminary Procedures
| |
1 | Hood Upper Hinge Bolt Notice: Refer to Fastener Notice in the Preface section. Tighten |
2 | Hood Upper Hinge |
3 | Hood Lower Hinge Welds Caution: When working with any type of glass or sheet metal with exposed or rough edges, wear approved safety glasses and gloves in order to reduce the chance of personal injury. ProcedureLocate and drill out all factory welds. Note weld are only for factory processing purposes. The replacement hinge does not need to be welded, just bolted on . |
4 | Hood Lower Hinge Bolt (Qty: 3) Tighten |
5 | Hood Lower Hinge |