Removal Procedure
- Remove the HVAC module. Refer to
HVAC Module Assembly Replacement
.
- If equipped remove the heat stakes (1) from the HVAC module (2) with a screwdriver and a hammer.
- If equipped remove the HVAC module assembly screws.
- Remove the upper HVAC module case (1) from the lower HVAC module case (2).
- Remove the right temperature door (4) from the upper HVAC module case (3).
Installation Procedure
- Install the right temperature door (4) to the upper HVAC module case (3).
- Install the upper HVAC module case (1) to the lower HVAC module case (2).
Notice: Refer to Fastener Notice in the Preface section.
Important: For every heat stake removed ensure that you install a screw.
- Install the screws to the HVAC module assembly.
Tighten
Tighten the screws to 1.6 N·m (14 lb in).
- Install the HVAC module. Refer to
HVAC Module Assembly Replacement
.