GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 2007 🢒 Yukon Denali 🢒 General Information 🢒 General Information 🢒 Stabilizer Shaft Insulator Replacement

Stabilizer Shaft Insulator Replacement 1500


Object Number: 1864816 Size: SF

Callout

Component Name

Preliminary Procedure

  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the engine shield, if equipped. Refer to Engine Shield Replacement .

1

Stabilizer Shaft Clamp Bolt (Qty: 2)

Notice: Refer to Fastener Notice in the Preface section.

Tighten
50 N·m (37 lb ft)

2

Stabilizer Shaft Clamp

3

Stabilizer Shaft Insulator

Tip
Ensure that the slit in the stabilizer shaft insulator is installed toward the rear of the vehicle.

Stabilizer Shaft Insulator Replacement 2500


Object Number: 1865485 Size: SF

Callout

Component Name

Preliminary Procedure

  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the engine shield, if equipped. Refer to Engine Shield Replacement .

1

Stabilizer Shaft Clamp Bolt (Qty: 2)

Notice: Refer to Fastener Notice in the Preface section.

Tighten
50 N·m (37 lb ft)

2

Stabilizer Shaft Clamp

3

Stabilizer Shaft Insulator

Tip
Ensure that the slit in the insulator is facing the front of the vehicle when installed.