GM Service Manual Online
For 1990-2009 cars only

    Object Number: 2073711  Size: MF
  1. Install the clutch plate assembly.
  2. Note: Ensure the drive plate does not drag against the pulley when the pulley is rotated.

  3. Measure the air gap between the pulley and the drive plate. Adjust the shims to achieve a 0.35-0.65 mm (0.014-0.026 in) air gap.
  4. Caution: Refer to Fastener Caution in the Preface section.

  5. Install the clutch plate retaining bolt and tighten to 18 N·m (13 lb ft).