Drive Motor with Generator Assembly Removal - 2nd Position. GMC Truck Yukon Denali 2009

For 1990-2009 cars only

Makes 🢒 GMC_Truck 🢒 2009 🢒 Yukon Denali 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Drive Motor with Generator Assembly Removal - 2nd Position

Callout	Component Name
1	Generator Drive Motor Bolt M6 x 1.0 x 20.0 (Qty: 3) Tip Remove only the three bolts on the motor that are indicated.
2	Drive Motor (w/Generator) Assembly - 2nd Position Warning: The generator motor weighs approximately 36 kg (80 lbs). Personal injury may result if you lift the generator motor improperly. Caution: Set drive generator motor on its side to avoid damaging the electrical connectors. Tip Ensure the DT-48473 is completely seated and locked on the motor assembly and ensure legs are bolted tight. It will require the use of an overhead chain fall to remove. The O-Ring seals are not reusable. Special Tool DT-48473 Motor Lift Plate

Callout

Component Name

Generator Drive Motor Bolt M6 x 1.0 x 20.0 (Qty: 3)

Tip
Remove only the three bolts on the motor that are indicated.

Drive Motor (w/Generator) Assembly - 2nd Position

Warning: The generator motor weighs approximately 36 kg (80 lbs). Personal injury may result if you lift the generator motor improperly.

Caution: Set drive generator motor on its side to avoid damaging the electrical connectors.

Tip
Ensure the DT-48473 is completely seated and locked on the motor assembly and ensure legs are bolted tight. It will require the use of an overhead chain fall to remove. The O-Ring seals are not reusable.

Special Tool

DT-48473 Motor Lift Plate