Inflatable Restraint Sensing and Diagnostic Module Programming and Setup. GMC Truck Yukon XL Denali 2006

For 1990-2009 cars only

Makes 🢒 GMC_Truck 🢒 2006 🢒 Yukon XL Denali 🢒 Vehicle Control Systems 🢒 Vehicle DTC Information 🢒 Inflatable Restraint Sensing and Diagnostic Module Programming and Setup

Introduction

The replacement of the inflatable restraint sensing and diagnostic module (SDM) will require that the SDM part number be relearned by other modules, such as the body control module (BCM), and the powertrain control module (PCM). The following procedures are designed to setup the SDM correctly and must be performed.

Important:

•	The Air Bag indicator may illuminate and DTC B1001 may set during the BCM reprogramming procedure.

•	Use the 10-minute relearn procedure when programming the theft deterrent system.

With the scan tool, perform the SETUP NEW SDM function located within the Supplemental Inflatable Restraint > Module Setup menu.
Check for DTC B1001. If B1001 is current, program the BCM with the proper regular production options (RPO). Refer to Body Control Module (BCM) Programming/RPO Configuration.
Clear any DTC.
Perform the Diagnostic System Check - Vehicle.