GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 2006 🢒 Yukon XL Denali 🢒 Suspension 🢒 Suspension General Diagnosis 🢒 Stabilizer Shaft Link Replacement

Stabilizer Shaft Link Replacement 15 Series

Removal Procedure
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .

    2. Object Number: 545533 Size: SH
  2. Remove the stabilizer shaft link nut and bolt from the frame bracket.
  3. Remove the stabilizer shaft link nut from the ball stud.
  4. Remove the stabilizer shaft link.

Installation Procedure

    Object Number: 545533 Size: SH
  1. Install the stabilizer shaft link.

    2. Important: When tightening the lower link nut verify that the inner jam nut bottoms out on the ball stud.


    Object Number: 613612 Size: SH
  2. Install the stabilizer shaft link nut to the ball stud.

    3. Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 545533 Size: SH
  3. Install the stabilizer shaft link nut and bolt to the frame bracket.

    4. Tighten

    1. Tighten the link to frame bracket nut to 65 N·m (48 lb ft).
    2. Tighten the ball stud to stabilizer shaft nut to 65 N·m (48 lb ft).
    3. Tighten the stabilizer shaft link to the stabilizer shaft to 145 N·m (107 lb ft).
  4. Lower the vehicle.