For 1990-2009 cars only
Removal Procedure
- Open the rear door or hatch.
- On vehicles with rear doors, remove the rear compartment opening weatherstrip. Refer to Rear Compartment Lid Weatherstrip Replacement in Body Rear End.
- Remove the screw that retains the upper quarter of the applique.
- Firmly grab the applique and pull the panel out from the body.
Installation Procedure
- Align the tabs to the body access holes.
- Push the applique into place.
- Install the screw that retains the upper quarter of the applique.
- On vehicles with rear doors, install the rear compartment opening weatherstrip. Refer to Rear Compartment Lid Weatherstrip Replacement in Body Rear End.
Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.
Tighten
Tighten the screw to 1.6 N·m (14 lb in).
