Removal Procedure
- Remove the seat back trim cover. Refer to
Front Seat Back Cushion Cover and Cushion Pad Replacement
.
- Remove the cardboard backer from the seat back frame.
2.1. | Use a razor blade, cut the adhesive securing the seat back foam to the
cardboard. |
2.2. | Lift the foam back foam over the head restraint tubes in the seat back
frame. |
2.3. | Remove the push-pin fasteners (1) securing the blower duct to the
cardboard backer (2). |
2.4. | Remove the cardboard backer from the seat back frame. |
- Remove the filter (2) from the ventilation
heat and cool blower.
Installation Procedure
- Install the filter (2) to the ventilation heat
and cool blower.
- Install the seat back cardboard panel.
2.1. | Position the cardboard backer to the seat back frame. |
2.2. | Install the push-pin fasteners (1) to secure the ventilation heat
and cool blower duct. |
2.3. | Position the seat back foam over the head restraint tubes. |
2.4. | Glue the seat back foam in the same locations as it was removed during
the removal process. |
- Install the seat back trim cover. Refer to
Front Seat Back Cushion Cover and Cushion Pad Replacement
.