1.1. | Twist the spark plug wire boot a 1/2 turn. |
1.2. | Pull only on the boot in order to remove the wire from the spark plug. |
2.1. | Twist the spark plug wire boot a 1/2 turn. |
2.2. | Pull only on the boot in order to remove the wire from the ignition coil. |
Important: The Melco® spark plug wires MUST be used only with the Melco® coils and bracket, like wise the Delphi® spark plug wires MUST be used only with Delphi® coils and bracket. The components are NOT interchangeable.
3.1. | Push sideways on each boot in order to inspect the seating. |
3.2. | Reinstall any loose boot. |