Circuit Description
The instrument panel cluster (IPC) illuminates the traction OFF indicator by supplying ground to the lamp. The electronic brake control module (EBCM) sends serial data messages to the IPC to command the indicator ON or OFF.
Diagnostic Aids
The malfunction must be present during diagnosis in order to prevent unnecessary parts replacement. Always begin diagnosis with Diagnostic System Check - Vehicle .
Test Description
The number below refers to the step number on the diagnostic table.
Step | Action | Yes | No |
|---|---|---|---|
Schematic Reference: Antilock Brake System Schematics Connector End View Reference: Antilock Brake System Connector End Views | |||
1 | Did you perform the Diagnostic System Check - Vehicle? | Go to Step 2 | |
2 |
Does the traction OFF indicator illuminate for approximately 2 seconds and then turn OFF? | Go to Diagnostic Aids | Go to Step 3 |
Does the traction off indicator turn OFF? | Go to Step 5 | Go to Step 4 | |
4 | Replace the IPC. Refer to Control Module References for replacement, setup, and programming. Did you complete the replacement? | Go to Step 6 | -- |
5 | Replace the electronic brake control module (EBCM). Refer to Control Module References for replacement, setup, and programming. Did you complete the replacement? | Go to Step 6 | -- |
6 |
Does the traction OFF indicator illuminate for approximately 2 seconds and then turn OFF? | System OK | Go to Step 3 |
