- Install the selective thrust washer (616) on the
input housing (621).
- Install the stator shaft/selective washer bearing assembly (615) on the
input housing (621).
The black race on the bearing goes toward the oil
pump.
- Install the reverse input clutch assembly (605) on the input housing
(621).
- Index the reverse input clutch plates with the input clutch hub. Make
certain all clutch plates are fully engaged.
- Install the reverse input and the input
clutch assembly into the transmission case.
- Index the 3rd and 4th clutch plates with the input internal gear.
• | Ensure that all clutch plates are fully engaged. |
• | When properly assembled, the reverse input clutch housing will be located
just below the case oil pump face. |