Tools Required
- Use the
J 36418-1B (1) in order to install the four turbine shaft oil seal rings (619).
- Resize oil seal rings (619) after installation:
2.1. | Place
J 36418-2A (2) over the turbine shaft oil seal rings (619) and seat against input housing. |
2.3. | Turn
J 36418-2A (2) upside down and place over the turbine shaft oil seal ring (619). |
2.4. | Seat against input housing. |
2.5. | Leave
J 36418-2A (2) in place over the turbine shaft oil seal rings (619) until the reverse input clutch housing is installed. |