For 1990-2009 cars only
Windshield Washers Not Spraying Properly (Install Foam Washer)
| Subject: | Windshield Washers Not Spraying Properly (Install Foam Washer) |
| Models: | 2007 Cadillac Escalade, Escalade ESV, Escalade EXT |
| 2007 Chevrolet Avalanche, Suburban, Tahoe |
| 2007 GMC Yukon, Yukon XL, Yukon Denali, Yukon XL Denali |
Condition
Some customers may comment that the windshield washers do not spray properly.
Cause
The washer hose may have become damaged under the wiper arm.
Correction
Install a foam shield on the pivot shaft.
- Remove the wiper arm finish cap.
- Remove the wiper arm nut.
- Using the J 39637 - Wiper Arm Removal Tool, remove the arms and lay to the side.
- Install the foam shield onto the pivot shaft and tuck it under the cowl inlet panel.
- Install the wiper arms.
- Install the wiper arm finish caps.
Tighten
Tighten the nut to 35 N·m (26 lb ft) while holding the wiper arm to the vertical black bar target mark located at the lower portion of the windshield.
Parts Information
Part Number | Description | Qty |
|---|---|---|
25816571 | Foam | 1 Per Package |
Warranty Information
For vehicles repaired under warranty, use:
Labor Operation | Description | Labor Time |
|---|---|---|
B1784 | Arm, Wiper- Windshield (One Or Both) - Replace | 0.4 hr |
