GM Service Manual Online
For 1990-2009 cars only

    Caution: Refer to Fuel Rail Stop Bracket Installation Caution in the Preface section.


    Object Number: 260098  Size: SH

    Important: The intake manifold, throttle body, fuel injection rail and fuel injectors may be removed as an assembly. If not servicing the individual components, remove the intake manifold as a complete assembly.

  1. Remove the fuel rail stop bracket and bolt, as required.

  2. Object Number: 1967303  Size: SH
  3. Remove the evaporative emission (EVAP) canister purge solenoid valve (730) and tubes (729, 735).

  4. Object Number: 1401976  Size: SH
  5. Remove the fuel rail bolts (511).
  6. Important: 

       • Do not separate the fuel injectors from the fuel rail, unless component service is required.
       • Use cleanliness and care when handling the fuel system components.
       • Do not allow dirt or debris to enter the fuel injectors or fuel rail components. Cap ends, as necessary.

  7. Remove the fuel rail (510) with injectors. Lift evenly on both sides of the fuel rail until all the injectors have left their bores.

  8. Object Number: 1401978  Size: SH
  9. Remove the fuel injector retainers (521) and fuel injectors (533), as required.
  10. Remove the O-rings (532, 534) from the injectors, as required.