High Voltage Circuit Impact Detection Sensor Replacement. GMC Truck Yukon XL Denali 2008

For 1990-2009 cars only

Makes 🢒 GMC_Truck 🢒 2008 🢒 Yukon XL Denali 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 High Voltage Circuit Impact Detection Sensor Replacement

High Voltage Circuit Impact Detection Sensor Replacement HP2

Callout	Component Name
Preliminary Procedure Turn the ignition switch to the off/lock position, remove the ignition key and secure in technicians pocket until procedure is complete. Remove the engine protection shield. Refer to Engine Shield Replacement .
1	High Voltage Circuit Impact Detection Sensor Notice: Refer to Fastener Notice in the Preface section. Procedure Disconnect the electrical connection. Loosen the sensor bolt. Tip The bolt is an integral part of the sensor and should remain with the sensor. Tighten 10 N·m (89 lb in)

Callout

Component Name

Preliminary Procedure

Turn the ignition switch to the off/lock position, remove the ignition key and secure in technicians pocket until procedure is complete.
Remove the engine protection shield. Refer to Engine Shield Replacement .

High Voltage Circuit Impact Detection Sensor

Notice: Refer to Fastener Notice in the Preface section.

Procedure

Disconnect the electrical connection.
Loosen the sensor bolt.

Tip
The bolt is an integral part of the sensor and should remain with the sensor.

Tighten
10 N·m (89 lb in)