For 1990-2009 cars only
Perform the initialization/teach procedure any time:
| • | A new sunroof motor/actuator has been installed. |
| • | The existing sunroof motor/actuator has been removed and reinstalled. |
| • | The sunroof system has suffered 3 interruptions for emergency events, i.e. anti-pinch, debris in tracks etc., and normal operation is canceled. |
By performing the initialization/teach procedure, the sunroof motor/actuator records the open vent stop position. The motor/actuator will then understand the other positions, closed and full open soft stop, and allow express and obstacle detection functions.
- Ensure that all electrical harness connectors are connected.
- Turn the ignition to ON.
- Completely close the sunroof window with the manual close switch.
- Press the sunroof vent switch to the vent open position until the sunroof window stops, and continue holding the switch for at least 10 seconds.
- Verify the operation of the sunroof in all positions.
Important: The initialization/teach procedure is not complete if the battery and/or ignition power has been interrupted during the process.
The Initialization/Teach Process must be restarted if the procedure is not carried out completely.