GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 2008 🢒 Yukon XL Denali 🢒 Body Repair 🢒 Bolted Exterior Body Panels and Closures 🢒 Cargo Box Stowage Box Lid Replacement

Removal Procedure
  1. Lower the endgate.
  2. Remove the cargo box cover assembly. Refer to Cargo Box Front Cover, Center Cover, and Rear Cover Replacement .
  3. Remove the assist handle. Refer to Endgate Assist Handle Replacement .
  4. Remove the top drain grate.
  5. Remove the cargo box bridge side inner panel. Refer to Cargo Box Bridge Side Inner Panel Replacement .

    6. Object Number: 1708946 Size: SH
  6. Remove the bolt (2) from inside the cargo box stowage lid assembly.
  7. Remove the bolts (1) from the top of the stowage lid.
  8. Remove the cargo box stowage box water run channel.
  9. Remove the cargo box from the vehicle.

Installation Procedure

    Object Number: 1708946 Size: SH
  1. Position the cargo box stowage lid (3) to the vehicle.

    2. Important: Ensure that the feather edge is properly sealed to the glass and side panels.

  2. Install the cargo box water run channel.

    3. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the bolts to the cargo box stowage lid (1).

    4. Tighten
    Tighten the bolts to 9 N·m (80 lb in).

  4. Install the bolt inside the cargo box stowage lid assembly (2).

    5. Tighten
    Tighten the bolt to 9 N·m (80 lb in).

  5. Install the cargo box bridge side inner panel. Refer to Cargo Box Bridge Side Inner Panel Replacement .
  6. Install the assist handle. Refer to Endgate Assist Handle Replacement .
  7. Install the cargo box cover assembly. Refer to Cargo Box Front Cover, Center Cover, and Rear Cover Replacement .
  8. Close the endgate.