Front Side Door Roof Drip Weatherstrip Replacement. GMC Truck Yukon XL Denali 2008

For 1990-2009 cars only

Makes 🢒 GMC_Truck 🢒 2008 🢒 Yukon XL Denali 🢒 Body Repair 🢒 Bolted Exterior Body Panels and Closures 🢒 Front Side Door Roof Drip Weatherstrip Replacement

Callout	Component Name
1	Weatherstrip Drip Rail Push Pin Retainers Tip The part and surface should be 21°C (70°F) prior to installation. The vehicle should remain 21°C (70°F) for one hour after assembly to allow adhesive to develop sufficient bond strength. Use a J 25070 Heat Gun or equivalent to remove the old weatherstrip. Clean all adhesive residue from the door opening and wipe the surface dry with a clean lint-free towel prior to installing the new weatherstrip. When removing protective liners from the adhesive backed weatherstrip, be careful not to touch the tape with hands. Do not allow the tape to come in contact with dirt or any foreign matter prior to adhesion.
2	Weatherstrip Drip Rail Tab Push-In Retainers (Qty: 7)
3	Weatherstrip Drip Rail Tip Press the weatherstrip firmly to the top side of the door opening to ensure full adhesion is made to the door opening.

Callout

Component Name

Weatherstrip Drip Rail Push Pin Retainers

Tip

The part and surface should be 21°C (70°F) prior to installation. The vehicle should remain 21°C (70°F) for one hour after assembly to allow adhesive to develop sufficient bond strength.
Use a J 25070 Heat Gun or equivalent to remove the old weatherstrip. Clean all adhesive residue from the door opening and wipe the surface dry with a clean lint-free towel prior to installing the new weatherstrip.
When removing protective liners from the adhesive backed weatherstrip, be careful not to touch the tape with hands. Do not allow the tape to come in contact with dirt or any foreign matter prior to adhesion.

Weatherstrip Drip Rail Tab Push-In Retainers (Qty: 7)

Weatherstrip Drip Rail

Tip
Press the weatherstrip firmly to the top side of the door opening to ensure full adhesion is made to the door opening.