Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
Schematic Reference: Selectable Ride Schematics | ||||
1 | Did you review the system circuit description and perform the necessary inspections? | -- | Go to Symptoms | |
2 | Verify the fault is present. Does the system operate normally? | -- | Go to Testing for Electrical Intermittents in Wiring Systems | |
3 |
Does the test lamp illuminate? | -- | ||
4 | Connect a test lamp (back probe), between fused ignition positive voltage circuit and a good to ground. Refer to Circuit Testing in Wiring Systems. Does the test lamp illuminate? | -- | ||
5 |
Does the test lamp illuminate? | -- | ||
6 | Repair the open in the fused ignition positive voltage circuit between the switch and Body Wiring Harness Junction Block. Refer to Wiring Repairs in Wiring Systems. Did you complete the repair? | -- | -- | |
7 | Repair the open switch ground circuit. Refer to Wiring Repairs in Wiring Systems. Did you complete the repair? | -- | -- | |
8 | Replace the selectable ride switch. Refer to Electronic Suspension Switch Replacement . Did you complete the replacement? | -- | -- | |
9 | Operate the system in order to verify the repair. Did you correct the condition? | -- | System OK | |
