GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 2005 🢒 Yukon XL - 2WD 🢒 Engine 🢒 Engine Electrical 🢒 Battery Tray Replacement

Removal Procedure

    Object Number: 662962 Size: SH
  1. Remove the battery. Refer to Battery Replacement .
  2. Remove the bolts from the battery tray support.

    3. Object Number: 847278 Size: SH
  3. Remove the bolts (1) from the fender inner panel.

    4. Object Number: 847274 Size: SH
  4. Remove the bolts (2) from the battery tray reinforcement.
  5. Remove the battery tray.

Installation Procedure

    Object Number: 847274 Size: SH
  1. Install the battery tray.
  2. Install the bolts (2) to the battery tray reinforcement until snug.

    3. Object Number: 847278 Size: SH
  3. Install the bolts (1) to the fender inner panel until snug.

    4. Object Number: 662962 Size: SH
  4. Install the bolts to the battery tray support until snug.

    5. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  5. Tighten the battery tray bolts.

    6. Tighten
    Tighten the bolts to 9 N·m (80 lb in).

  6. Install the battery. Refer to Battery Replacement .