Tools Required

1. Remove all pump bolts (2) and pump bolt seal (3).
2. Install J 39119  (4) over stator shaft until it locks under splines.
3. Install J 37789-A  (1).



4. To prevent slipping, securely fasten the J 37789-A around the J 39119 by tightening the bolt (1) with a wrench.
5. Turn the T-handle on top of J 37789-A .
6. Lift the pump (4) out of the case.



7. Remove the fluid pump seal (5).
8. Remove the pump cover to case gasket (6).