Automatic Transmission Controls Schematics. GMC Truck Yukon XL

For 1990-2009 cars only

Makes 🢒 GMC_Truck 🢒 2007 🢒 Yukon XL - 2WD 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Automatic Transmission Controls Schematics

Figure 1:	Module Power, Ground, Serial Data and Stop Lamp Signal Master Electrical Component List Electronic Component Description Control Module References Shift Controls G102 and G108 RUN/CRANK Bus - AIRBAG IGN, MISC IGN, ans SEO/ALC Fuses RUN/CRANK Bus - AIRBAG IGN, MISC IGN, ans SEO/ALC Fuses RUN/CRANK Bus - AIRBAG IGN, MISC IGN, ans SEO/ALC Fuses G102 and G108 Stop Lamp Controls and CHMSL Stop Lamp Controls and CHMSL G103, G110, and G111 RUN/CRANK Bus - AIRBAG IGN, MISC IGN, ans SEO/ALC Fuses RUN/CRANK Bus - ECM-IGN and TRANS IGN 1 Fuses B+ Bus - 1 of 3 ECM-BATT, HEADLAMP WASH, HVAC BATT, IPC, LTR, S/ROOF, and TCM-BATT Fuses DLIS Fuse and Ignition Switch High Speed Bus - 1 of 2
Figure 2:	Shift Controls Master Electrical Component List Electronic Component Description Control Module References Pressure and Temperature Controls Module Power, Ground, Serial Data, and Stop Lamp Signal Module Power, Ground, Serial Data, and Stop Lamp Signal RUN/CRANK Bus - ECM-IGN and TRANS IGN 1 Fuses
Figure 3:	Pressure and Temperature Controls Master Electrical Component List Electronic Component Description Control Module References PNP Signals, Speed Signals, and Tow/Haul Signal Shift Controls
Figure 4:	PNP Signal, Speed Signals, and Tow/Haul Signal Master Electrical Component List Electronic Component Description Control Module References Pressure and Temperature Controls G103, G110, and G111 Low Speed Bus - SP200 - 1 of 3 G201