Special Tools

For equivalent regional tools, refer to Special Tools

Note: Do not apply threadlock to the flex plate bolts at this time.

1. Temporarily install the automatic transmission flex plate and bolts. Refer to Automatic Transmission Flex Plate Installation.

Caution: Refer to Fastener Caution in the Preface section.




2. Install the J 42386-A tool  (1) and bolts. Use 1 M10 - 1.5 x 120 mm and 1 M10 - 1.5 x 45 mm bolt for proper tool operation. Tighten the J 42386-A tool bolts to 50 N·m (37 lb ft).




Caution: Do not turn the crankshaft assembly after the timing chain has been removed in order to prevent damage to the piston assemblies or the valves.

3. Remove and discard the camshaft sprocket bolt (206).
4. Remove the camshaft sprocket (205) and timing chain (208).



5. Remove the bolts (231) and timing chain tensioner (232).



6. Use the J 41816-2 protector  (1), the J 41558 remover  (2), bolts (3), and the J 8433 puller J 8433 puller  (4) in order to remove the crankshaft sprocket.



7. Remove the crankshaft sprocket (207).



8. Remove the crankshaft sprocket key, as required.
9. Remove the automatic transmission flex plate and bolts. Refer to Automatic Transmission Flex Plate Removal.
10. Remove the J 42386-A tool and bolts.