Note:
⢠| When using the valve lifters again, install the lifters to their original locations. |
⢠| If camshaft replacement is required, the valve lifters must also be replaced. |
⢠| Each of the 4 valve guide assemblies will contain 2 active fuel management valve lifters and 2 non-active fuel management valve lifters. |
⢠| With the lifters and guides properly installed, cylinders 1, 4, 6, and 7 lifter bores will each contain 2 active fuel management valve lifters. |
⢠| Align the flat area (3) on the top of the non-active fuel management lifter with the flat area in the lifter guide bore. Push the lifter completely into the guide bore. |
⢠| The active fuel management lifters (4) are to be installed into the guide, with the notch in the guide (1) aligned with the raised area (2) of the lifter. |
Caution: Refer to Fastener Caution in the Preface section.