GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 2009 🢒 Yukon XL - 2WD 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Engine Coolant Fan Motor Replacement

Engine Coolant Fan Motor Replacement Non-HP2

Removal Procedure

    Object Number: 1505517 Size: SH
  1. Remove the cooling blade(s). Refer to Engine Coolant Fan Replacement.
  2. Remove the cooling fan motor bolts.
  3. Remove the cooling fan motor(s).

Installation Procedure

    Object Number: 1505517 Size: SH
  1. Install the cooling fan motor(s).

    2. Caution: Refer to Fastener Caution in the Preface section.

  2. Install the cooling fan motor bolts.

    3. Tighten
    Tighten the bolts to 10 N·m (89 lb in).

  3. Install the cooling fan blades. Refer to Engine Coolant Fan Replacement.

Engine Coolant Fan Motor Replacement HP2


Object Number: 1966867 Size: MF

Callout

Component Name

Preliminary Procedures

  1. Remove the cooling blade(s). Refer to Engine Coolant Fan Replacement
  2. Disconnect the electrical connectors from the cooling fans.

1

Cooling Fan Motor Bolts (Qty: 6)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
10 N·m (89 lb in)

2

Cooling Fan Motor(s).