GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 2009 🢒 Yukon XL - 2WD 🢒 Body Systems 🢒 Lighting 🢒 Brake Pedal Position Sensor Replacement

Removal Procedure

    Object Number: 1687770 Size: SH
  1. Remove the driver knee bolster. Refer to Knee Bolster Replacement.
  2. Remove the fuse block cover.
  3. Disconnect the brake pedal position sensor electrical connector (1).
  4. Remove the brake pedal position sensor bolts (2).
  5. Remove the brake pedal position sensor (3) from the vehicle.

Installation Procedure

    Object Number: 1687770 Size: SH
  1. Install the brake pedal position sensor (3) to the vehicle.

    2. Caution: Refer to Fastener Caution in the Preface section.

  2. Install the brake pedal position sensor bolts (2) and tighten to 9 N·m (80 lb in).
  3. Connect the brake pedal position sensor electrical connector (1).
  4. Install the fuse block cover.
  5. Install the driver knee bolster. Refer to Knee Bolster Replacement.