Callout
| Component Name
|
Preliminary Procedures
- Disable the supplemental inflatable restraint (SIR) system. Refer to
SIR Disabling and Enabling.
- Remove the rear door trim panel. Refer to
Rear Side Door Trim Panel Replacement.
|
1
| Front Side Door Check Link Bolt
Caution: Refer to Fastener Caution in the Preface section.
Tighten 20 N·m (15 lb ft) |
2
| Rear Side Door Upper Hinge Bolt (Qty: 2)
Procedure
- Remove the water deflector.
- Disconnect the door electrical connector.
- Support the door before removing the hinge bolts.
- With the aid of an assistant, remove the door.
Tighten 18 N·m (24 lb ft) |
3
| Rear Side Door Lower Hinge Bolt (Qty: 2)
Tighten 18 N·m (24 lb ft) |
4
| Rear Side Door Assembly
Procedure
- When replacing the door it is necessary to transfer all of the internal components.
- Apply LOCTITE® Blue GM P/N 12345382, or (Canadian P/N 10953489), or equivalent to the fastener prior to installation.
|