GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 2009 🢒 Yukon XL - 2WD 🢒 Steering 🢒 Power Steering 🢒 Power Steering Fluid Cooler Replacement

Power Steering Fluid Cooler Replacement Without Hydroboost

Removal Procedure
  1. Remove the fascia grille. Refer to Fascia Grille Replacement.
  2. Remove the radiator grille reinforcement support, if equipped. Refer to Radiator Grille Reinforcement Support Replacement.
  3. Remove as much power steering fluid as possible from the power steering fluid reservoir.
  4. Place drain pans under the vehicle as needed.

    5. Caution: Refer to Power Steering Hose Disconnected Caution in the Preface section.


    Object Number: 1861214 Size: SH
  5. Disconnect the power steering gear outlet hose (2) from the power steering fluid cooler (4).
  6. Disconnect the power steering fluid cooler hose (3) from the power steering pump (1).

    7. Object Number: 686121 Size: SH
  7. Remove the power steering fluid cooler bolts (2) from the power steering fluid cooler.
  8. Remove the power steering fluid cooler from the vehicle.

Installation Procedure
  1. Install the power steering fluid cooler to the vehicle.

    2. Caution: Refer to Fastener Caution in the Preface section.


    Object Number: 686121 Size: SH
  2. Install the power steering fluid cooler bolts (2) to the power steering fluid cooler (1).

    3. Tighten
    Tighten the bolts to 9 N·m (80 lb in).


    Object Number: 1861214 Size: SH
  3. Connect the power steering fluid cooler hose (3) to the power steering pump (1).
  4. Connect the power steering gear outlet hose (2) to the power steering fluid cooler (4).
  5. Clean any excess fluid from the vehicle and remove the drain pans.
  6. Fill and bleed the power steering system. Refer to Power Steering System Bleeding.
  7. Install the radiator grille reinforcement support, if equipped. Refer to Radiator Grille Reinforcement Support Replacement.
  8. Install the fascia grille. Refer to Fascia Grille Replacement.

Power Steering Fluid Cooler Replacement With Hydroboost

Removal Procedure
  1. Remove the fascia grille. Refer to Fascia Grille Replacement.
  2. Remove the radiator grille reinforcement support, if equipped. Refer to Radiator Grille Reinforcement Support Replacement.
  3. Remove as much power steering fluid from the power steering fluid reservoir as possible.
  4. Place drain pans under the vehicle as needed.

    5. Caution: Refer to Power Steering Hose Disconnected Caution in the Preface section.


    Object Number: 686126 Size: SH
  5. Disconnect the power steering fluid cooler hose (3) from the steering gear (2).
  6. Disconnect the power steering fluid cooler hose (4) from the power steering pump (1).

    7. Object Number: 686121 Size: SH
  7. Remove the power steering fluid cooler bolts (2).
  8. Remove the power steering fluid cooler (1) from the vehicle.

Installation Procedure

    Object Number: 686121 Size: SH
  1. Install the power steering fluid cooler (1) to the vehicle.

    2. Caution: Refer to Fastener Caution in the Preface section.

  2. Install the power steering fluid cooler bolts (2).

    3. Tighten
    Tighten the bolts to 9 N·m (80 lb in).


    Object Number: 686126 Size: SH
  3. Connect the power steering fluid cooler hose (4) to the power steering pump (1).
  4. Connect the power steering fluid cooler hose (3) to the steering gear (2).
  5. Clean any excess fluid from the vehicle and remove the drain pans.
  6. Install the radiator grille reinforcement support, if equipped. Refer to Radiator Grille Reinforcement Support Replacement.
  7. Install the fascia grille. Refer to Fascia Grille Replacement.
  8. Fill and bleed the power steering system. Refer to Power Steering System Bleeding.