GM Service Manual Online
For 1990-2009 cars only

Intake Manifold Assemble C/K/C3500HD/Medium Duty


    Object Number: 471015  Size: SH
  1. Apply a very light film of clean engine oil to the purge solenoid seal.
  2. Install the purge solenoid.
  3. Apply thread adhesive GM P/N United States 12345493, GM P/N Canada 10953488, or equivalent to the threads of the purge solenoid bolt.
  4. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  5. Install the purge solenoid bolt.
  6. Tighten
    Tighten the purge solenoid bolt to 10 N·m (88 lb in).


    Object Number: 471013  Size: SH
  7. Install the purge solenoid vacuum hose.

  8. Object Number: 471009  Size: SH
  9. Install the EGR adapter gasket.
  10. Install the EGR adapter.
  11. Install the EGR adapter nuts.
  12. Tighten
    Tighten the EGR adapter nuts to 22 N·m (16 lb ft).


    Object Number: 471008  Size: SH
  13. Install the EGR valve gasket.
  14. Install the EGR valve.
  15. Install the EGR valve nuts.
  16. Tighten
    Tighten the EGR valve nuts to 22 N·m (16 lb ft).


    Object Number: 471023  Size: SH

    Important: Lubricate the port of the MAP sensor with clean engine oil. Avoid dipping the sensor port directly into the lubricant or using a solid type of lubricant, as they may block the vacuum port signal.

  17. Install the MAP sensor.
  18. Install the MAP sensor bolt.
  19. Tighten
    Tighten the MAP sensor bolt to 12 N·m (106 lb in).


    Object Number: 470760  Size: SH
  20. Install the throttle body gasket.
  21. Install the throttle body.
  22. Install the throttle body nut.
  23. Tighten
    Tighten the throttle body nuts to 10 N·m (88 lb in).

Intake Manifold Assemble G


    Object Number: 471015  Size: SH
  1. Apply a very light film of clean engine oil to the purge solenoid seal.
  2. Install the purge solenoid.
  3. Apply thread adhesive GM P/N United States 12345493, GM P/N Canada 10953488, or equivalent to the threads of the purge solenoid bolt.
  4. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  5. Install the purge solenoid bolt.
  6. Tighten
    Tighten the purge solenoid bolt to 10 N·m (88 lb in).


    Object Number: 471013  Size: SH
  7. Install the purge solenoid vacuum hose.

  8. Object Number: 677740  Size: SH
  9. Install the EGR valve gasket.
  10. Install the EGR valve.
  11. Install the EGR valve nuts.
  12. Tighten
    Tighten the EGR valve nuts to 22 N·m (16 lb ft).


    Object Number: 471023  Size: SH

    Important: Lubricate the port of the MAP sensor with clean engine oil. Avoid dipping the sensor port directly into the lubricant or using a solid type of lubricant, as they may block the vacuum port signal.

  13. Install the MAP sensor.
  14. Install the MAP sensor bolt.
  15. Tighten
    Tighten the MAP sensor bolt to 12 N·m (106 lb in).


    Object Number: 470760  Size: SH
  16. Install the throttle body gasket.
  17. Install the throttle body.
  18. Install the throttle body nut.
  19. Tighten
    Tighten the throttle body nuts to 10 N·m (88 lb in).