When hydraulic fluid is present on the concentric slave cylinder, check for worn or damage seals or other faulty parts of the clutch actuator.
The number(s) below refer to the step number(s) on the diagnostic table.
This step explains there parts and the operation of the clutch system.
This step checks for any seal leaks from the clutch actuator.
Step | Action | Yes | No | ||||||
---|---|---|---|---|---|---|---|---|---|
DEFINITION: Hydraulic fluid is in the concentric slave cylinder area or on the cylinder body. | |||||||||
Did you review the clutch symptom operations and perform the necessary inspections? | Go to Step 2 | Go to Symptoms - Clutch | |||||||
Is there a leak on the clutch actuator cylinder? | Go to Step 3 | System OK | |||||||
3 | Replace the clutch actuator. Refer to Clutch Concentric Actuator Cylinder Replacement . Did you find and repair the condition? | Go to Step 4 | Go to Diagnostic Aids | ||||||
4 | Operate the system in order to verify the repair. Did you correct the condition? | System OK | Go to Step 1 |