GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

    Important: Do not grab or pull on the CD storage door when removing the trim bezel.


    Object Number: 387749  Size: SH
  1. Remove the screws securing the trim bezel to the console extension.
  2. Protect the console extension from damage then carefully use a small prying device to push in the tabs underneath the trim bezel securing the top of the trim bezel.
  3. Remove the trim bezel.

  4. Object Number: 386712  Size: SH
  5. Use a small screwdriver in order to release the CD player retainers.
  6. Slide the CD player out .
  7. Disconnect the electrical connector.

Installation Procedure


    Object Number: 386712  Size: SH
  1. Connect the electrical connector.
  2. Install the CD player.
  3. When the CD player is fully seated, snap the unit into the retainers.

  4. Object Number: 387749  Size: SH

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  5. Install the trim bezel and the screws.
  6. Tighten
    Tighten the screws to 2 N·m (18 lb in).

  7. Verify the component operation.