GM Service Manual Online
For 1990-2009 cars only

Step

Action

Value(s)

Yes

No

Schematic Reference: Instrument Cluster Schematics

1

Did you perform the Instrument Cluster Diagnostic System Check?

--

Go to Step 2

Go to Diagnostic System Check - Instrument Cluster

2

Turn ON the ignition with the engine OFF.

Does the engine oil pressure indicator display in the message center?

--

Go to Step 3

Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems

3

  1. Start the engine.
  2. Check the engine oil pressure gauge in the IPC.

Does the engine oil pressure gauge display at or below the specified value?

0 psi (0 kPa)

Go to Engine Oil Pressure Gage Inaccurate or Inoperative

Go to Step 4

4

Replace the IPC. Refer to Instrument Cluster Replacement .

Did you complete the replacement?

--

Go to Step 5

--

5

Operate the system in order to verify the repair.

Did you correct the condition?

--

System OK

Go to Step 3