Removal Procedure
- Remove instrument panel (IP) bezel. Refer to
Instrument Panel Cluster Trim Plate Bezel Replacement
in Instrument Panel, Gauges and Console.
- Gently lift the switch retaining tabs (1)
and remove the traction control switch (2) from the instrument panel
(IP) assembly (3).
- Disconnect the harness connector from the traction control switch.
Installation Procedure
- Connect the harness connector to the traction control switch.
- Install the traction control switch (2)
into the instrument panel (IP) assembly (3), making sure that all of
the switch retaining tabs (1) are engaged.
- Install instrument panel (IP) bezel. Refer to
Instrument Panel Cluster Trim Plate Bezel Replacement
in Instrument Panel, Gauges and Console.